PDA

View Full Version : Development board is available for ATMEGA 16/32/8535



pratikmahale
04-12-2008, 12:56 AM
Hi ,
Today only I purchased a PCB for ATMEGA 16/32/8535 from Visha Electronics, Bombay

The board has following features

1) On Board Regulator (7805) with filters
2) RS 232 serial port interfacing circuit using MAX232 (9 pin D connector)
3) AVR ISP port
4) Large general purpose PCB area (41*14) on Both side for additional circuit
5) 10 pin FRC connector for all four port of ATMEGA
6) Reset Switch
7) Power Indicator LED
8) Power on/off switch

Price of PCB is Only Rs. 90/-

Regards,

Pratik

superchiku
04-12-2008, 01:12 AM
coool bcoz ur in bombay , u dont get anything good here in bbsr

rao
04-12-2008, 05:40 AM
sounds like an excellent deal.. can you post some pics please?

Rao

debu
04-12-2008, 08:17 AM
@Pratikmahale: Rs. 90?? 8O Thats a really good price!!

Do post some pictures, I would like to see this board. :D

Regards,

Debu :)

pratikmahale
04-12-2008, 12:39 PM
hi,
check the link for photos

http://www.picattic.com/files/9hgbcs2cp3mttidzd9ox.jpg
http://www.picattic.com/files/wevft9lsyr1jj3jo50hs.jpg



Regards,


pratik

debu
04-13-2008, 10:40 AM
@pratikmahale: Looks like an excellent deal!! The boards, look very professional. Do they use PTH too?

Regards,

Debu :)

pratikmahale
04-13-2008, 01:47 PM
hi,
it a single side PCB so no PTH

but the PCB quality is very good
"Visha " use to sell same type of pcb for 89 series Atmel Micorcontrollers for Rs. 60/- only

Regards,

pratik

elecrom
06-01-2008, 08:55 PM
Hello everyone ..

I have developed this general purpose development board for AVRs. Board is available in fully populated form or only PCB.

This board is excellent for robotics and prototype development

Board have following features :
-mega16/32/8535 compatible
-max232
-2x L293D
-LEDs
-direct plug-in connection for LCD on PORTB
-connectors for all 4 ports. Along with 5V supply pin besides every port
-POTs for ADC inputs
-TSOP1738 for IR remote
-I2C EEPROM
-One speaker.
-on board 3.3V supply and connector for SPI bus (so you can interface MMC/SD cards or flash memories like AT45DB161)


Here is the link : AVR dev brd (http://elecrom.wordpress.com/2008/03/25/new-version-out-low-cost-development-board-for-avr-mega1632/)


Board don't have prototyping area. However board is designed in such a way that you can easily construct your own daughter board and attach it to main board.

Only PCB costs 200/-.

Have a look at it if anybody is interested.
NB : Its difficult for me to provide fully populated boards. I have only 4 in stock. However I can provide blank PCBs as many as you want.

avinash_g
09-28-2009, 12:00 PM
Hello,

We have same config PCB for Rs90 (This Includes shipping any where in India)


Details Here
http://shop.extremeelectronics.co.in/product_info.php?products_id=98

Photo

http://extremeelectronics.co.in/images/shop/40_pin_low_cost_avr_development_board.jpg

If you get the Bare PCB then see
Assembly Instructions Here
http://extremeelectronics.co.in/avr-development-board/avr-development-board-assembly-instructions/