PDA

View Full Version : bipolar stepper motor with parallel port



qwerty
07-11-2008, 10:50 PM
i'm using a bipolar stepper motor(six wires)with stepper driver(AMS-243 ark motion).i'm trying to interface through parallel port so as to generate pulses to control it's angle of rotation.
plz help me! :roll:

ppppking04
07-12-2008, 12:29 PM
Six wires steppers generally are unipolar motors.

Please read: http://www.roboticsindia.com/modules.php?name=Forums&file=viewtopic&t=3350

qwerty
07-12-2008, 10:46 PM
Six wires steppers generally are unipolar motors.

Please read: http://www.roboticsindia.com/modules.php?name=Forums&file=viewtopic&t=3350

hey man when u r not sure don't say it like that (bipolar stepper motor may have 4,6 ,or 8 wires). :?:

docel
07-12-2008, 11:19 PM
qwerty!
1. The man says "generally". That means there 'could be' some oddball steppers with more than 4 wires.
There are constraints, however:
http://www.cs.uiowa.edu/~jones/step/types.html


2. Read this :
. I did not get any references about your
(AMS-243 ark motion)
What is it :?:

qwerty
07-13-2008, 03:26 PM
qwerty!
1. The man says "generally". That means there 'could be' some oddball steppers with more than 4 wires.
There are constraints, however:
http://www.cs.uiowa.edu/~jones/step/types.html


2. Read this :
. I did not get any references about your
(AMS-243 ark motion)
What is it :?:
just go to this link
http://www.arkmotion.com/products.htm
then go to (drives)

docel
07-14-2008, 12:00 AM
Well ?
Man, be specific with your needs. Don't push people to links that YOU should read and follow !
You read the Documentation of the Drive first, identify your problem and state that clearly in your post.
Being Cryptic and posting 1 line riddles is not correct :evil: