PDA

View Full Version : Low Cost Atmel and PIC Programmers for SALE



suniljha
01-09-2005, 09:40 AM
Hi friends,
After struggling a lot I finally Succeded in developing low cost Atmel and PIC Programmers. Now understanding their requirement, I decided to replicate them and sell it to those who wish to purchase them. Details are as follows:

------------------------------------------------------------------------------------
1. Atmel Programmer (No Need of preprogrammed 89C51)

MCUs Supported: AT89C51, AT89LV51, AT89C52, AT89LV52, AT89C55, AT89C55WD, AT89C51RC, AT89S52, AT89S53, AT89S8252, AT89LS52, AT89LS8252

Kit Includes: Soldered Programmer board, Parallel Port Cable, Power Supply, and Programming Software.

Cost: Rs. 850/- including Free Shipping anywhere in INDIA
------------------------------------------------------------------------------------

2. PIC Programmer (In-Circuit Serial Programmer)

MCUs Supported: All MCUs supported by ICPROG

Kit Includes: Ready to use soldered Programmer board, Power Supply, Programming Software and Parallel Port cable.

Cost: Rs. 450/- including Free Shipping anywhere in INDIA
-------------------------------------------------------------------------------------

Those who are interested, please mail me at suniljha@iitk.ac.in

suniljha
01-09-2005, 07:17 PM
Hi all,
Images of Prototypes developed and tested are shown below. The actual programmer shipped will be similar one.

1. Atmel Programmer

http://home.iitk.ac.in/student/suniljha/images/ATPGMR_1.jpg
http://home.iitk.ac.in/student/suniljha/images/ATPGMR_2.jpg

2. PIC Programmer

http://home.iitk.ac.in/student/suniljha/images/PICPGMR_1.jpg
http://home.iitk.ac.in/student/suniljha/images/PICPGMR_1.jpg

Sunil Jha

suniljha
01-10-2005, 08:57 AM
Dear Friends,
I would like to make one thing very clear that please don't get impression from the prices mentioned above that I am anywhere in the business with these programmers. These programmers are open source and are freely available on their respective websites. I own nothing about them, these are properties of respective developers and owners.
My efforts are here only to help fellow beginners and learners in getting resources with least effort. I spent 2-3 months in searching a good and cheap programmer. I know many of us are students here and its difficult to afford high prices. Another thing is that even we found many open source circuits available on the websites, its difficult to make one on our own because getting PCB made in itself a big headache and costly if you go for 1-2 no. And then do good soldering after assembling all components. And the last troublesome part is debugging the circuit and make it functional. I completed all this only 2-3 days before, so planned to save time of others who want to have a cheap programmer for their developments.
The cost above mentioned only involves PCB cost, component cost, soldering cost, and then shipping cost. These are solely for personal and non-commercial use as per the license terms of their respective developers.

Hope I cleared my stand.

Sunil Jha

http://www.sunrom.com
01-11-2005, 04:08 PM
We have released the 89 series programmer under GNU at this site

http://chaokhun.kmitl.ac.th/~kswichit/89prog/index.html

Sunrom Technologies

Sunil Jha
01-11-2005, 04:32 PM
Thats great! Cheers to Sunrom Technologies. Can you please let me know the price of Double sided PCB, 40 pin and 20 pin ZIF Sockets and Programmed Microcontroller?

Sunil Jha

http://www.sunrom.com
01-11-2005, 08:18 PM
Package contains
1) 20 pin ZIF Socket
2) 40 pin ZIF socket
3) Double Sided PCB(With Legend and Masking)
4) PreProgrammed MCU

Cost for this package will be 970/-
Add to it shipping anywhere in india by DTDC courier is 100/-

We also support payment by netbanking accounts of Indian banks,
Or India anywhere Cheque/Cash deposit in our ICICI Bank Account,

Regards,
Sunrom Technologies

ice
01-13-2005, 11:27 PM
My efforts are here only to help fellow beginners and learners in getting resources with least effort.

...way to go mate!! This is real good and will really be helpful.

And i must say they are pretty reasonable too.. :lol:

-ice

yogi
01-17-2005, 07:19 AM
see best PIC pgmer

http://www.covingtoninnovations.com/noppp/

suniljha
01-17-2005, 08:37 AM
it supports only PIC16C84, PIC16F83, and PIC16F84(A) microcontrollers.

Sunil

Sunrom
01-23-2005, 01:28 AM
If anyone wants to make Atmel 89 Series programmer
then here is the article, source code, sch, PCB files...
http://www.sunrom.com/article_info.php?articles_id=6

At the bottom of the aticle you can find individual parts available like ZIF sockets, pre-programmed IC and unpopulated PCB.

dhruvkaran
06-06-2005, 02:26 PM
hi,
we are dhruv and pratik from mumbai
we are interested in the pic programmer(2 nos.) if it is still available
please reply
dhruv
dhruvkaran(at)gmail(dot)com

gabrus666
07-20-2005, 01:27 AM
mr. jha please leave me ur number so that i can call u.

shobhitkukreti
09-28-2005, 11:32 PM
Mr Jha ... is'nt the jdm programmer good for pic ... it supports almost any pic .. even newer versions with a lil modification by addindg a N-channel Mosfet ... and i built it for RS 30 and use IC-prog as well as winpic to program it ... itz eazy n kool ... cud u show the detailed documents of the pic programmer plz ... thx ....

kunal
10-13-2005, 11:46 AM
HELLO EVERY BODY

I HAVE PURCHASED THIS PROGRAMMER FROM MR SUNIL JHA.

THIS IS ONE OF THE MOST ADVANCED LOW COST PROGRAMMER I HAVE EVER SEEN

MUST TRY OUT THIS ONE.

IT IS REALLY CHEAP AND EASY TO WORK.

ALL THE SOURCE CODES PROVIDED ARE VERY NICE AND PROVIDES THE ALL NECESSARY THINGS TO GET YOUR PROJECT STARTED AS SOON AS YOU GET YOUR PROGRAMMER

EmbeddedGuy
10-13-2005, 10:42 PM
Hello,
Mr. Sunil Jha can you provide me web address of the project Atmel and PIC programmer.
Bye