PDA

View Full Version : very fast line follower!!



hardikcool
05-14-2009, 09:17 AM
hi guys....
i have a line follower module of 3 amp motor driver which follows a black line on surface but its detection is not as fast as i want.
instead i got to know about a line sensor array which gives TTL outputs..it can read line at 3.5 m/s....
now the problem is how to connect these both to get started!!

this is ma first time on a line follower so say whatever u feel but at least say!!

elecrom
05-14-2009, 06:47 PM
Please elaborate in detail.

hardikcool
05-15-2009, 09:20 AM
the module which i have:
http://robokits.co.in/shop/index.php?main_page=product_info&cPath=1&products_id=21



line sensor array details:
http://robokits.co.in/shop/index.php?main_page=product_info&cPath=1&products_id=43



so should i buy the line sensor array and can i fix it somehow on d module to make it so fast?

elecrom
05-16-2009, 07:13 PM
I did not get exactly what does these "Line Follower Module With 3 Amp motor driver" do ? Do they have controller or just comparator, how these modules operate ?

One more thing, such a fast line follower cannot be built by just plugging in ready made components. You have to make ur own sensors and consider the dynamics of the bots. When and how to turn on the motors, how to accelerate or decelerate, etc.

hardikcool
05-16-2009, 07:17 PM
hmmm.....thats what i m askin...i was shocked when i saw these two components and d shop keeper dat they can be joined in to make a very fast line follower.....



so wil have to start again from a,b,c,d......

ok thanks 4 d help!