PDA

View Full Version : shop



jeetbuz
12-31-2009, 06:03 PM
can anyone tell me a good shop(not online) in delhi to buy a cheap and good, (around 500) avr programmer and a decent development board,
i hope it is good for a start.

vikas
12-31-2009, 07:35 PM
Rs 500 is too low , Also no cheap shops in delhi as such. For 500 DIY.

jeetbuz
01-01-2010, 02:36 AM
how much avr programmer will cost ??, on extreme electronics it is for ~350
development board will be expensive i suppose,will dig deeper in my wallet for it, but where can i get best deal in delhi. ( never done online shopping)

found a good site
http://electronics-diy.com/avr_programmer.php
thnx for your help

avinash_g
01-01-2010, 10:53 AM
Well this ATmega16/ATmega32 boards won't burn out your pocket !!!

http://shop.extremeelectronics.co.in/product_info.php?cPath=23&products_id=98

I bet you can't find cheaper board of same quality any where else (even offline)

we are selling them out at almost production cost

The total including everything to start up is Rs 1045 (Including Packing & Shipping)(excluding power supply, buy locally @ Rs 50)

avinash_g
01-01-2010, 11:01 AM
After all don't think that the shopkeeper (at Delhi or Any other place) is going to give any After sale TECHNICAL support for a 1000 buck purchase.

But you can always call us and and ask "what the 2nd bit in the UCSRA does ???"

Does your shop keeper gives you tutorial and source code when you buy a Rs 100 LCD Module ???

But we strive to give much documentation and code for any thing you purchase like a MCU, A RTC Module, Radio Module or anything ...

Thats the difference ! We must advance with time

Today we can't confine us to a single city or Country

vikas
01-01-2010, 11:18 AM
After all don't think that the shopkeeper (at Delhi or Any other place) is going to give any After sale TECHNICAL support for a 1000 buck purchase.

You get the dev board and programmer for that cost you will be lucky. Offline shops are usually run by older people who dont really care about what they are selling , the service or you ... just there to make money not help out in process.

I totally agree with avinash_g on this.

jeetbuz
01-01-2010, 06:52 PM
thnx for the reply

the board seems grt, i think i wiil go with it

vikas
01-01-2010, 08:17 PM
Here is another one -

This board sets new standard from uC and low cost dev board .

http://www.st.com/mcu/contentid-130-113-STM8S_DISCOVERY.html

USB programmer + JTAG
32kb flash clocked at 16 Mhz

A complete microcontroller development kit for little more than the cost of a bare chip

And it costs just 7 USD :) , look into it.

Here is link if you want it ( currently a new product , so maybe we will see it later for Rs 300 or so )

http://in.farnell.com/jsp/displayProduct.jsp?sku=1775251&icid=i-6b28-00001699

Ulhas
01-02-2010, 08:17 PM
Have a look here

http://elecrom.wordpress.com/2008/03...-avr-mega1632/

This Fellow also sales USBasp an USB based avr programmer

regards

ulhas