PDA

View Full Version : AT commands for Samsung Champ



anilmaddala
01-11-2011, 01:32 AM
Hi, i recently bought a Samsung Champ mobile phone. i would like to try AT commands over it, but am in kind of fix.

Probably some one with experience could help me with these:

1) How to use USB connected phones for AT commands?

2) At command List for Samsung Champ.

Thanks,

Anil

PS: I browsed the net, but could not find a solution to the first one. For the second issue, i read that most AT commands are the same for different mobiles.

vikas
01-11-2011, 08:29 PM
Look into SIM 300 AT command reference.

For AT commands your phone should be detected as a Serial port , then simply use any terminal program to interact with it.

anilmaddala
01-14-2011, 08:38 PM
Hi Vikas,

Thanks for the reply. I am now able to send SMS throug AT commands using Hyper-terminal.

This link was of great help:

http://www.developershome.com/sms/howToSendSMSFromPC.asp

A quick question:

My mobile supports USB, so how can i connect my mobile to a micro-controller?