PDA

View Full Version : pulses to coils controller



Gary Porter
12-24-2013, 10:49 PM
Hi All

I need a micro circuit that will allow me to control digital pulses to 20 coils. I have the circuitry done that will drive the coils. The pulses from memory or whatever will change depending upon switch settings. for example coil #1 will need 10101...... pulses. coil #2 will need 11011.... and coil #3 will need 01110...... This project is a magnetic platform that can move in any direction based on pulse trains to the coils.
you can contact me directly captainssbn at yahoo

thanks
Gary