PDA

View Full Version : motor trouble



dhruvkaran
06-07-2005, 04:31 PM
hi ppl,
we got 12V motors fom rhythm elec, lamington rd., mumbai
we connected them across a l293d from the parallelport
now when we use outportb(0x378,0x01) the motor works but only with an initial push
with outportb(0x378,0x02) it doesn't even do that with initial help
although in both cases the motor does vibrate
please help us on this issue
dhruv

sumandeep1984
06-09-2005, 12:17 PM
have u given 12V alternate Power Supply to the L293D ... if yes and connections are correct .... it should work .... check the current ratings of motor and 12 volt supply

May even try connecting a 0.1 uF capacitor accross the motor terminals ....

addy
10-12-2005, 12:58 AM
one of the reasons why ur l293d wont work is due to the current rating of the motor.check out how much it draws with and without loading...
it shouldn be more than .5amps.
do all these only once u r sure tat all other connections r correct

ice
10-12-2005, 06:55 AM
dhruv,
post your circuit

Beanie
06-23-2006, 01:15 AM
hi...
The first thing to check would be the DC supply rating. If the motor is rated at 12V, i guess its minimum current rating should be anywhere between 0.5A to 2.0 A. So if are not using the proper battery, then the motor will only give jerks, when not aligned with a pole. When it aligned with a pole, and if for the next step the current is not upto the rated current, the motor wont move at all...
Best Of Luck

docel
06-23-2006, 01:34 AM
Hello Beanie!

Much appreciate your help, but you are a year too late!
Dhruvkaran must've completed his course by now!!
Dont feel bad if nobody replies or dont acknowledge your help- most people dont!

You seem to have some experience with circuits. Thats good and can be of help to others.Please make sure you read the posts before submitting. That way, you can ensure that your intent to help is meaningful!!

:D Welcome to RI good luck and happy hunting :!:

( This does not imply that answering old posts is wrong.)[/b]