PDA

View Full Version : Motorola 68HC11 Microcontroller.



EmbeddedGuy
10-08-2005, 05:59 PM
Hi,
I am new to this forum and this is my first post. I am look out for 68HC11 , from where I will get the same.
Bye

ice
10-09-2005, 05:46 AM
You get it at Visha electronics or at component masters,Lamington Road..check out which series you need..there is the A and the E series ...

Also "Component masters" chips are sometimes ripoffs from old devices,so be careful...

Warn them ,that you will return it if it doesnt work..i did it once..

cost is around 300 to 400 a chip..

I would suggest,if you are a newbie,try a lesser cost chip first..
If you have a 68HC11 development board..it would be alright then..

EmbeddedGuy
10-09-2005, 01:36 PM
Hi,
Where you are ice in Bombay can we meet and share ideas and info. Send me contact info by PM.
I will visit the shops as mentioned by you.
Bye

EmbeddedGuy
10-09-2005, 01:36 PM
Hi,
Where you are ice in Bombay can we meet and share ideas and info. Send me contact info by PM.
I will visit the shops as mentioned by you.
Bye

ice
10-09-2005, 09:57 PM
pm sent.

nchinoy
10-20-2005, 11:26 AM
I guess its a late reply... But i would second the thought that if you are a newbee to micro's you should stick with something much more simpler... I have used the 68HC11 and 68HC12 and its really something you wanna use for a LOT of applications ... It has a lot of features i would think a newbee would not need .. Not to mention the cost factor...

Anyways if you really looking out for 68HC11 then i suggest you go though the book "MicroController Technology : 68HC11" by peter Spasov is one of the good books. It covers the generics along with the implementation and architectural description of the 68HC11...


Just my 2cents worth

Cheers,

Nimesh S Chinoy