Blog Comments

  1. ayu135's Avatar
    is there a list of all the small components too like the capacitors, resistors and the other things on the pcb? I couldnt find anything and i need the specific values of those components
  2. amitpratap's Avatar
    thanks, that was useful
    Updated 05-21-2013 at 03:59 PM by amitpratap
  3. kaatan's Avatar
    You have errors in codes
  4. shakerobo's Avatar
    Great work........looking forward to it's developments.
  5. vinodstanur's Avatar
    I simply called it "worst".... ;-)
    have a look at this link:
    http://hackaday.com/2012/03/28/build...linux-pc-ever/
  6. vinodstanur's Avatar
    I simply called it "worst".... ;-)
    have a look at this link:
    http://hackaday.com/2012/03/28/build...linux-pc-ever/
  7. lolman_returns's Avatar
    @vinod: Worst linux? You realize the conceptual boundaries this guy has shattered right?
  8. vinodstanur's Avatar
    hope U have seen the "WORST LINUX on an 8 bit AVR" in hackaday.com ;-)
    http://dmitry.co/index.php?p=./04.Th...ux%20on%208bit
    Updated 04-19-2012 at 12:31 AM by vinodstanur
  9. ankit26's Avatar
    heyyyyyy
    does this shield able to run 2 stepper motor and a servo motor at same time????
    please help me its really urgent!!!
  10. vikas's Avatar
    You can check ngcoders.com , it has already been booted and PCB's are ready.
  11. puneetverma24's Avatar
    Great project .Now What is the status of your project.

    i like to work with you ?
    But i don't know much about linux boards & its working.
    Updated 04-06-2012 at 08:26 AM by puneetverma24
  12. javed's Avatar
    HI GUYS HOW ARE YOU ALL
    I NEED UR HELP TO BUILD AN LINE FOLLOWING ROBOT..........................
    I DONT KNOW FROM WHERE I SHOULD START..............
    HERE IS A COMPETETION ON LINE FOLLOWING ROBOT KINDLY HELP ME PLZZZZZZ
  13. shekhar046's Avatar
    good yaar..........
    it is very effective and multipurpose.............
    i'm very much glad to see this.........
    only the thing is little bit costly,so if possible lower it's cost by some alternate device..
    thanks 4 making this
  14. 007roy's Avatar
    can you please tell me more about the BIST you mentioned above-built in self test.i would really like to incorporate that into my robot.thanks.waiting for your reply.
  15. vikas's Avatar
    Quote Originally Posted by rao
    So Cool, finally got to see the circular base.
    Why no RiDuino?
    New riduino2 is in works . which will be basically the board + motor controller.
  16. rao's Avatar
    So Cool, finally got to see the circular base.
    Why no RiDuino?
  17. vikas's Avatar
    Quote Originally Posted by allbits
    What RPM are the motors?
    Around 1000 RPM for 6V
  18. allbits's Avatar
    Good entry, and the robot IS fast..

    What RPM are the motors?
  19. MGear's Avatar
    I made an apparatus for the Etching process with HCl and H2O2 with bubbling facility for oxidation, but after spending good deal o time and money, I see that something is wrong here.Though the process is clean and reusable.But the process which should complete in 10mins or so is taking upto 10 hrs! I used 10M Hcl and 3%H2O2 in 2:1 proportion.
    Any one with prior experience?
  20. Aneez2's Avatar
    thanks for the info
Page 1 of 4 123 ... LastLast