Your browser does not support iframes.
is there a list of all the small components too like the capacitors, resistors and the other things on the pcb? I couldnt find anything and i need the specific values of those components
thanks, that was useful
You have errors in codes
Great work........looking forward to it's developments.
I simply called it "worst".... ;-) have a look at this link: http://hackaday.com/2012/03/28/build...linux-pc-ever/
@vinod: Worst linux? You realize the conceptual boundaries this guy has shattered right?
hope U have seen the "WORST LINUX on an 8 bit AVR" in hackaday.com ;-) http://dmitry.co/index.php?p=./04.Th...ux%20on%208bit
heyyyyyy does this shield able to run 2 stepper motor and a servo motor at same time???? please help me its really urgent!!!
You can check ngcoders.com , it has already been booted and PCB's are ready.
Great project .Now What is the status of your project. i like to work with you ? But i don't know much about linux boards & its working.
HI GUYS HOW ARE YOU ALL I NEED UR HELP TO BUILD AN LINE FOLLOWING ROBOT.......................... I DONT KNOW FROM WHERE I SHOULD START.............. HERE IS A COMPETETION ON LINE FOLLOWING ROBOT KINDLY HELP ME PLZZZZZZ
good yaar.......... it is very effective and multipurpose............. i'm very much glad to see this......... only the thing is little bit costly,so if possible lower it's cost by some alternate device.. thanks 4 making this
can you please tell me more about the BIST you mentioned above-built in self test.i would really like to incorporate that into my robot.thanks.waiting for your reply.
Originally Posted by rao So Cool, finally got to see the circular base. Why no RiDuino? New riduino2 is in works . which will be basically the board + motor controller.
So Cool, finally got to see the circular base. Why no RiDuino?
Originally Posted by allbits What RPM are the motors? Around 1000 RPM for 6V
Good entry, and the robot IS fast.. What RPM are the motors?
I made an apparatus for the Etching process with HCl and H2O2 with bubbling facility for oxidation, but after spending good deal o time and money, I see that something is wrong here.Though the process is clean and reusable.But the process which should complete in 10mins or so is taking upto 10 hrs! I used 10M Hcl and 3%H2O2 in 2:1 proportion. Any one with prior experience?
thanks for the info