Your browser does not support iframes.
These Days im building a Balancing Robot so here are step wise how to interface a arduino to Accelerometer and Gyro Things ive used 1. ATmega8 Arduino ( ARP 1.0u) 2. DIY Proto Shield 3. 3.3V Zener + 330 Ohm for 3.3V supply 4. Triple Axis Accelerometer Breakout – MMA7260 ( @Sparkfun ) 5. Gyro Breakout Board – LY530AL – 300°/s ( @Sparkfun ) The Gyro and Accelerometer were bought from Feemo India , as i found them the cheapest retailers ...
Updated 02-06-2010 at 12:41 PM by vikas