Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: NEED 30,000 RPM OR GREATER DC MOTOR IN INDIA

  1. #1
    Junior Member Newbie
    Join Date
    Nov 2007
    Location
    Mumbai
    Posts
    3

    Default NEED 30,000 RPM OR GREATER DC MOTOR IN INDIA



    HI GUYS,

    I AM CURENTLY DEVELOPING A VERTICAL CLIMBING ROBOT, I NEED A HIGH RPM & HIGH TORQUE DC MOTOR TO CREATE THE REQUIRED DOWNFORCE.
    CAN ANYONE TELL ME WHERE CAN I GET THAT SPECIFICATION MOTOR IN MUMBAI ,OR CAN BE BOUGHT ONLINE IN INDIA ONLY PLZ.

    ALSO WHERE CAN I GET THOSE 3/4 BLADE FANS THAT CAN BE COUPLED TO SUCH A MOTOR.

    PLZ HELP ME FELLOWS. :roll: [/b]

  2. #2
    Senior Member Android
    Join Date
    Dec 2005
    Location
    Mumbai
    Posts
    111

    Default

    your caps writing style SUCKS
    nways, you could get a 50K rpm motor at Servo Electronics, lamington road in mumbai. But be cautioned, the motor consumes a hell lot of startup current (well over 10Amps) there are other small motors with 20k 25k rpm available...u will also find props for these motors over there...but they arent for vertical flight...

    Regards,


    [/i]

  3. #3
    Senior Member T-1000
    Join Date
    Mar 2005
    Location
    Bangalore
    Posts
    728
    Blog Entries
    7

    Default

    why would you need a high rpm motor??
    .... I didnt do it ! ....

  4. #4
    Super Moderator T-1000 docel's Avatar
    Join Date
    Sep 2005
    Location
    BANGALORE
    Posts
    1,441
    Blog Entries
    3

    Default

    You do'nt need a hi RPM motor for this.
    In fact , it is the wrong choice.
    If you are thinking of "flying" out of the pit--forget it.
    The 'downforce' is ok, in the open, not in the confined pit of the IITM.
    Your Heli will promptly smash into the adjacent walls due to the turbulance.
    docel
    ^Anything is possible..
    after YOU prove it!!

    http://bangalorerobotics.tripod.com

  5. #5
    Junior Member Newbie
    Join Date
    Nov 2007
    Location
    Mumbai
    Posts
    3

    Default

    hey fellows the motor i need to create suction so that the robot can adhere to the wall and not for take off.
    i am making a wall climber .

    btw any other place other than servoelectronics ,already tried there but of no avail.

  6. #6
    Super Moderator T-1000 docel's Avatar
    Join Date
    Sep 2005
    Location
    BANGALORE
    Posts
    1,441
    Blog Entries
    3

    Default

    So, why not say that -in the beginning- instead of AFTERwards :evil:
    docel
    ^Anything is possible..
    after YOU prove it!!

    http://bangalorerobotics.tripod.com

  7. #7
    Junior Member Newbie
    Join Date
    Nov 2007
    Location
    Mumbai
    Posts
    3

    Default

    ahem ahem any suggestions ?

  8. #8

    Default

    You can go through the website www.maxonmotor.com You will find solution on it.Also you can give detail contact no. on info@inteltekindia.com so that we will get in touch with you.

    Thanks and Regards

  9. #9

    Default you can get 30000 and 16000 rpm motor from this site

    http://www.celeritusindia.com

    send email to this site for your requirement of 30000rpm motor

    input 16000 rpm motor with gearbox with also available

  10. #10
    Junior Member Newbie
    Join Date
    Mar 2011
    Location
    ahemedabad
    Posts
    1

    Default

    hi i also want ths motor ...hi darshan if u have any material or idea to develop wall climbing robot ...i want to make ths ...i m trying last 8 months...but i couldn't success..plz help me....

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •