Results 1 to 4 of 4

Thread: ezAVR Programming AVR microcontrollers by serial port

  1. #1
    ST
    Guest

    Default ezAVR Programming AVR microcontrollers by serial port

    ezAVR is a low cost way to program AVR microcontrollers through ICSP(In-Circuit Serial Programming). With ICSP the AVR gets programmed without removing it from existing hardware or without touching any hardware part. The process of reprogramming thus becomes totally touchless.

    It works from serial port and does not need any external power supply. PonyProg software is used in conjuction with ezAVR hardware providing read, write, lock, fuse functions.

    Schematic and full details are provided here,
    http://www.sunrom.com/projects/ezavr...ntrollers.html

  2. #2

    Default link is dead

    link is dead please post it again

  3. #3

  4. #4

    Default

    I use BSD programmer. I feel it is the cheap programmer with cost rs.40

    http://booksbybibin.14.forumer.com/viewtopic.php?t=3
    troubleshooting
    http://booksbybibin.14.forumer.com/viewtopic.php?t=6

    Parallel port cable+5 wires. More about this programmer
    see in book
    MY EXPERIENCE IN PROGRAMMING AVR MICROCONTROLLER IN C USING WINAVR

    you can get it from yahoo group-booksbybibin
    http://groups.yahoo.com/group/booksbybibin/

    give ur suggestions about this book on
    http://www.booksbybibin.blogspot.com/

    Bibin John
    www.bibinjohn.tk

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •