Results 1 to 7 of 7

Thread: Sanguino

  1. #1
    Junior Member Newbie sidzy's Avatar
    Join Date
    Jul 2011
    Location
    mumbai
    Posts
    8

    Question Sanguino

    I purchased a sanguino supporting development board from a local dealer.
    but I am finding it difficult to install and compile a sketch.
    I have installed arduino 1.0 and tweeked it for sanguino but it gives me some error while compiling.
    Can any one guide me with installing it properly?

  2. #2
    Senior Member T-1000
    Join Date
    Jun 2007
    Location
    Jamshedpur/Bhubaneswar
    Posts
    421

    Default

    Wow someone can even break Arduino !

    "Can any one guide me with installing it properly?"

    Now we have to write a tutorial on how to unzip a zip file.

    Since it gives you "some error" you can solve it going to "some menu" and then open "some setting" and change that to "some other" value and try again.

    Well my answer is as precise as your question.
    Avinash Gupta
    ************
    www.eXtremeElectronics.co.in

  3. #3
    Junior Member Newbie sidzy's Avatar
    Join Date
    Jul 2011
    Location
    mumbai
    Posts
    8

    Default

    the error says error: Arduino.h: No such file or directory
    I have unzipped Arduino-1.0
    and copied the Sanguino folder in the "hardware" folder of the unzipped directory.
    yet I get this error.

  4. #4
    Senior Member T-1000
    Join Date
    Jun 2007
    Location
    Jamshedpur/Bhubaneswar
    Posts
    421

    Default

    What is the program you are trying to compile???
    Avinash Gupta
    ************
    www.eXtremeElectronics.co.in

  5. #5
    Senior Member Android roopakjada's Avatar
    Join Date
    Aug 2010
    Location
    hyderabad
    Posts
    121
    Blog Entries
    1

    Default

    that is a problem with the sanguino related hardware files the newer version of the IDE has some changes in it. Try it with previous version like Arduino 22. you can also use sanguino with arduino but will need to make some changes google for more info its got to do with the header file.

  6. #6
    Junior Member Newbie sidzy's Avatar
    Join Date
    Jul 2011
    Location
    mumbai
    Posts
    8

    Default

    the program is working fine with Arduino 22.
    I was trying to get familiar with the programming environment.

    int ledPin=3;

    void setup()
    {
    pinMode(ledPin, OUTPUT);
    }
    void loop()
    {
    for(int i=0; i<10; i++)
    {
    if(i<5)
    {
    ledPin=HIGH;
    }
    else
    {
    ledPin=LOW;
    }
    delay(10);
    }
    }

  7. #7
    Junior Member Newbie
    Join Date
    Oct 2013
    Location
    Bangalore, India
    Posts
    2

    Default

    Don't Update the Arduino software if you use sanguino with it
    If you update, there is a lot to tweak and make it work

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •